2 190,- Kč
uvedená cena je za pár
Skladem
Přidat do seznamu přání Hlídací pes

Audison Prima AP1 Tweeter

- 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- Neodymium magnet with low carbon content plates, provides reduced size and more linear sound reproduction, even during the most demanding audio passages.
- Acoustic lens designed to compensate for and fine tune the in-car frequency response anomalies in the 10 kHz - 13 kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- Extremely compact dedicated passive crossover APCX TW supplied with the product, optimised for OEM Integration, featuring an attenuation switch (0 dB, +2 dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with “OEM Integration compliant” fast-on connectors. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.
- Wide array of mounting accessories supplied with the product, for high fitment flexibility in OEM Integration.
- CCAW (Copper Clad Aluminium Wire) ultra-light ferrofluid cooled voice coil is wound on a Kapton former, for better heat dissipation.
- Dome profile and motor are optimised with FEM (Finite Element Method) simulation technology.
- Developed with the KLIPPEL suite.
Component: Tweeter
Size: 26mm
Power Handling: 150W
Impedance:
Frequency Response: 2kHz ÷ 20kHz
Magnet Size: 19x3mm
Weight of one speaker: 0.07kg
Voice Coil Ø: 20mm

ELECTRO-ACOUSTIC PARAMETERS
D: 27.5mm
Re: 3.4Ω
Fs: 1500Hz
Le: 0.02mH
Mms: 0.28g
Cms: 0.04mm/N
BL: 1.9 T•m
Qts: 0.85
Qes: 2.5
Qms: 1.3
Spl: 90dB
Prepíšte text z obrázku do poľa. Ak nedokážete text rozoznať, kliknite na obrázok.
 
Prepíšte text z obrázku do poľa. Ak nedokážete text rozoznať, kliknite na obrázok.
 
- 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- Neodymium magnet with low carbon content plates, provides reduced size and more linear sound reproduction, even during the most demanding audio passages.
- Acoustic lens designed to compensate for and fine tune the in-car frequency response anomalies in the 10 kHz - 13 kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- Extremely compact dedicated passive crossover APCX TW supplied with the product, optimised for OEM Integration, featuring an attenuation switch (0 dB, +2 dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with “OEM Integration compliant” fast-on connectors. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.
- Wide array of mounting accessories supplied with the product, for high fitment flexibility in OEM Integration.
- CCAW (Copper Clad Aluminium Wire) ultra-light ferrofluid cooled voice coil is wound on a Kapton former, for better heat dissipation.
- Dome profile and motor are optimised with FEM (Finite Element Method) simulation technology.
- Developed with the KLIPPEL suite.
Component: Tweeter
Size: 26mm
Power Handling: 150W
Impedance:
Frequency Response: 2kHz ÷ 20kHz
Magnet Size: 19x3mm
Weight of one speaker: 0.07kg
Voice Coil Ø: 20mm

ELECTRO-ACOUSTIC PARAMETERS
D: 27.5mm
Re: 3.4Ω
Fs: 1500Hz
Le: 0.02mH
Mms: 0.28g
Cms: 0.04mm/N
BL: 1.9 T•m
Qts: 0.85
Qes: 2.5
Qms: 1.3
Spl: 90dB
Prepíšte text z obrázku do poľa. Ak nedokážete text rozoznať, kliknite na obrázok.
 
Prepíšte text z obrázku do poľa. Ak nedokážete text rozoznať, kliknite na obrázok.